Waterproof FLEXLOCK, User Manual

Page: 4 / 8

1. Expose the FlexLock ring by folding back
the warm cuff.
3. Ensure the sealing area in the ring and the
bottom part of the silicone seal are completely
clean.
5. NOTE! The white edge must point outward.
4. Place bottom of the seal above the groove,
as close to the transparent ring as possible.
6. Check that the seal is positioned over the
groove around the entire ring.
2. Open up the transparent ring by folding
back the outer part completely.
Remove the seal.
SEAL REPLACEMENT
FlexLock Manual 231115 Waterproof Diving Intl AB