3
4
1
2
Replace
Fill
High
Low
Pause
NO
Gap
Insert
Remove the reservoir from
base and fill with lukewarm
water.
Replace the reservoir onto
the base,
PRESSING DOWN
FIRMLY
to ensure full seating.
For first time
users, adjust
pressure control
to
lowest position
.
Gradually increase
pressure to your liking.
Prior to Very First Use of Unit, Prime Unit:
Set pressure control dial on base to
high
,
point
the handle and tip into sink. Turn unit
ON
until
water flows from the tip, turn unit
OFF
.
You can temporarily stop
water flow by pressing
the pause button on
the handle.
continued on back
Press tip firmly into
handle. When tip is
properly inserted there
should be no gap
between handle and
colored tip ring.
This device is compatible with a voltage system of 240V, 50Hz. Do not plug this device into a voltage system that is different.
Adjust Pressure and Pause Control:
Select and Insert Tip:
Prepare the Reservoir:
Prime Unit (First Time Use Only):
Model WP-100
Mod
QUICK START GUIDE
