74
|
90
Checking the Compressor Oil Level
1
3
Use the illustrations and instructions to check the
compressor oil level. Check the oil level daily
when the system is not in use and replenish the
oil as needed.
1 The oil level is too high when it is higher than
halfway up the sight glass. Drain the
appropriate amount of oil. Refer to:
the Compressor Oil" on page 75.
Note:
If the oil level is too high, it is important
to determine the cause. Check for water
entering the compressor from the pump,
then repair or replace any components
allowing water through.
2 The oil level is too low when it is lower than
halfway up the sight glass. Add the appropriate
amount of oil. Refer to:
Note:
If the oil level is too low, it is important
to determine the cause. Check the
compressor for leaks and repair as
needed.
3 The appropriate oil level is halfway up the sight
glass.
2
Summary of Contents for Eclipse
Page 3: ......
Page 45: ...Notes...
