Waterous AQUIS ULTRAFLOW, Installation And Operation Manual

Page: 41 / 56

41
|
56
Safety Introduction Product Overview Installation Operation Maintenance
Solution Screen—Telemetry
< SYSTEM GAUGE >
REAR PASSENGER
2~1/2”
DRIVER 6”
FRONT / REAR
CROSSLAY 1~3/4”
PASSENGER 6"
#1 / #2 DRIVER
2~1/2”
DECK GUN 8”
#1 / #2 PASSENGER 2.5”
GAL GAL
CONCENTRATE
PRESSURE
RELIEF
750
111.2
3.0
3708
GPM
375
11.3
112.0
#1 / #2
PASSENGER 2~1/2”
CONCENTRATE ON
1
2
3
4
6
5
Use the illustration and definitions to understand the
information displayed. Short-press a DLA button to
open the DLA solution screen. From this screen you
can enable and disable concentrate flow to the
discharge, adjust the concentrate percent, and view
the current and total flow values.
1 This is the name of the selected DLA.
2 This is the total amount of concentrate dispensed
from the selected DLA since panel power-up.
Long-press the value to reset it to zero.
3 This is the
total
amount of water dispensed from
the selected DLA since panel power-up. Long-
press the value to reset it to zero.
4 This graphically and numerically shows the
current concentrate flow rate for the selected
DLA, as well as the concentrate-line pressure.
5 This graphically and numerically shows
total
amount of water dispensed from the selected
discharge since panel power-up. Long-press
the value to reset it to zero.
6 This is the concentrate percent set-point.