The following table lists the parts. Item numbers are referenced in some of the
diagrams that follow.
ITEM
NUMBER
PART
DESCRIPTION
QUAN
TITY
1
ST1 tap
3-Function touch screen tap for chilled
filtered, chilled filtered sparkling and
ambient filtered water.
With wiring loom.
1
1
ST2 tap (when
substituted for
ST1 tap)
5-Function tap for chilled filtered, chilled
filtered sparkling and ambient filtered
water. Connection to existing unfiltered
hot and cold water via braided flexible
hoses.
With wiring loom.
Hot water flexible hose.
Cold water flexible hose.
1
1
1
1
2
¼ inch push-in
connector
Connects water outlet tube to outlet tap
1
3
¼ inch LLDPE tube For all water and CO
2
connections
3 M
4
3-way valve
For connection to water outlet
1
5
350 Kpa pressure
limiting valve
Reduces inlet water pressure when
1
6
STM1 unit
Main chiller/filter & carbonation unit
1
7
Pressure regulator
valve
To set and adjust CO
2
output pressure
1
8
240 V power
supply cable
Connects unit to standard AU 10 A
power outlet
1
9
BC filter
1
1
Table 3:
Parts List
10
NSC filter
Nano silver carbon ultra fine water filter
Copyright Sodatap© 2023 Page 8 STM1 Manual V10
Block carbon water filter
required* (see note below table)
* This appliance incorporates backflow protection complying with AS/NZS 3500.1
No further backflow protection required for connection to the water supply
