Before operating the appliance, please read the instruction manual completely and keep it handy for future
reference.
SAFETY INSTRUCTIONS
READ AND FAMILIARIZE YOURSELF WITH THE SAFETY INSTRUCTIONS BEFORE USING the PUMP
●Compare the incoming voltage and frequency of your electrical circuit with the data on the model
plate. This data must correspond.
●Before reaching in the water always unplug power cords of devices in the water.
●The cable cannot be changed or lengthened. The pump may not be operated if the cable or the housing
are defective.
●Pay close attention when this pump is used near children's activity areas.
Keep way from moving part to avoid any harm.
●Please disconnect all accessories if the pump does not work.
●Do not carry or pull the pump by the connecting power cord.
●Do not change the pump impellor with any other brand/type of pump, as parts are not interchangeable.
●Lay the power cord in a protected conduit to prevent the possibility of cable damage
Installation
Insert the suction cups or rubber feet at the base of the pump motor body, then install the pump
submersed under water surface completely.
