Page
7
of
12
1.
The left-hand side button is used as a method to scan through the 6 states of the charge controller. (see table of States
and Settings)
Simply press it one press at a time to scroll through the different screen displays.
The different screens provide information about the current setting of the charge controller.
2.
The left-hand side button is used as a s (Plus / Increase) function when in programming mode, to change a
setting upwardly. For each button depression, the setting is charged incrementally upwardly. ((The Right Button Does the
opposite))
3.
Selection Function - To enter programming mode
4.
To exit programming mode, if a setting has been changed, the new setting will be saved. or if no setting was made, it
allows you to exit without making any change as well.
Right Hand Side Button (RHS-B)
1 Function
–
Changing setting downwardly
1.
The right-hand side button is used as a setting - (Negative / Reduce / Diminish / Decrement / Downwardly adjust)
function when in programming mode, to change a setting downwardly. For each button depression, the setting is charged
incrementally downwardly. ((The left-hand button does the opposite))
Menu
/ System State / Parameter Changes
Left Hand Side Button
Right Hand Side
Button
Display
