Water Leak Detection
Equipment
Including BREEAM and
CIREG Requirements
Waterguard Flow 7 V17X
Initial Set Up and Operating Guide V23
© 2023 Waterguard Services Limited, All Rights Reserved
Waterguard Services Limited. Registered address: 22 Oakwell Business Centre,
Oakwell View, Barnsley, South
Yorkshire, S71 1HX. Tel: 01226 244200. Email: [email protected].
Contact Us….
If you require any further assistance operating the Waterguard Flow 7 or if the Flow 7 is not functioning
correctly, our technical support and further product information is available during office hours. Please call
01226 397987 to speak with one our technical experts, ensure to have your order details ready so we can
handle your query as efficiently as possible.
Maintenance….
This system requires minimal maintenance
.
In hard water areas it is recommended that any connected
valves are dismantled and cleaned with limescale remover every 12 months as build up can cause the
valve operation to fail.
System Profile…
The Flow 7 controller monitors the water flowing through ONE (single channel) water meters.
If the maximum allowable volume of water is exceeded, the controller will emit an audible and visual
alarm alerting that a leak has been detected, the valve can be set to automatically shut off the water
supply.
There are two guard levels,
low guard
for when the property is occupied and
high guard
for when it
is unoccupied. To familiarise yourself with your installed Waterguard System please read this user
guide in full. If you have any further questions, please contact the office.
Reinstating the Water Supply….
Ensure to check for leaks before reinstating the water supply, if an alarm persists without a leak consider
increasing litre allowance in the guard menu:
1.
From the controller:
Access the Operating menu by pressing any button, navigate to the
channel which has closed (LEAK CLOSED) and press the OK button to open the valve.
2.
From the valve:
All solenoid valves up to 2” include a manual override. Ensure the override is
adjusted by a competent person.
For unlimited water usage:
Access the Operating menu by pressing any button, push the left arrow
button and OK to start manual override, override time determined in Guard menu.
