7 |
How to install your GENNY
Position the GENNY
Make sure there is at
least 15 cm between the
machine and the wall.
Make sure the GENNY is
straight and balanced,
level the front legs if
necessary.
15 cm
External air filter
Unscrew the nut and install the new air filter. Close the air
filter housing and the matching nut (B).
A.
B.
Install the spacer
Install the spacer in the back
of the unit with 4 screws
using Philips screwdriver.
Remove the front
panel by holding both
sides.
Internal air filter
Slide the internal filter
in place.
1
2
3
4
5
6
7
Install water filters
Install the 3-filters set in the right order from 1 to 3
(left to right) by inserting each one (A) and screwing
until you hear a click (B).
A.
B.
Smart Control App for Managing your GENNY.
By connecting your GENNY to the Wi-Fi, you will be able to monitor your GENNY from wherever you are, 24/7.
The GENNY mobile app offers a range of benefits including the ability to view an analytical summary of your
system, water production, climate conditions as well as remote technical support.
In addition, you will be able to get notification when the maintenance procedure should be performed.
Watergen's GENNY App is available on:
GENNY App
| 6
