Electrical connection required to use the integrated
pool water pump timer of your pool heat pump.
Note:
This option is available only for Smart Energy model.
If you wish to use the integrated timer of your pool heat pump; you must warn your
electrician at the time of installation.
All electrical work should be performed by a fully
qualified and licensed electrician in accordance with local electrical codes.
The pool
pump
MUST
not consume more than 16 amps.
NOTE:
The junction box of the timer does not provide power for the swimming pool pump,
but instead switches the power (which is fed from another source) on and off to control
the pump. An adequate circuit breaker dedicated to the swimming pool pump must be
installed with copper wiring used in order for the benficial functions of the timer. It may be
neccessary to install a ground fault circuit breaker.
IMPORTANT
Use the junction box at the base of pool heat pump
For model Smart Energy System Only
Wiring colour codes are:
Green : Ground
Black : Input L1
White : Input L2
Orange : Output T1
Red
: Output T2
Junction Box
for the timer
Pool Pump Beaker
Pool Pump
