6
2.
Configuring the camera function
The function of WAT-2500/3500 can be set by the RC-01 (remote controller).
Utilize the option RC-01 (remote controller) to set function through OSD (On Screen
Display) menu.
2.1.
RC-01 (Remote Controller)
Operate the OSD menu by the RC-01.
Connect the RC-01 to the REMOTE terminal on the rear of the camera. Remote
controller unit providing access to adjustments, settings the functions on the OSD
menu.
*When using the remote controller, vertically insert the connector fully until it clicks.
When disconnecting the remote controller, pull the connector while pinching the
lock.
Figure 1. RC-01 (remote controller)
1. UP, 2. DOWN
: Cursor control for selecting the OSD menu items.
3. LEFT,
4. RIGHT
: Change the settings or value on the OSD menu.
5. ENTER
: Open the OSD menu. Execute the selected item or function.
