Watchguard hifi microphone, User Manual

Page: 21 / 40

Contacts for charging and synchronizing
Contacts for charging and
synchronizing
The contacts for charging the
transmitter (mic) and synchronizing
the mic with the base are inside on
the floor of the base. These contacts
physically line up with those on the
bottom of the mic and make it
possible for the base to charge and
sync with the mic.
Note: This graphic shows the base from above, looking
down into it.
Transmitter
The transmitter (mic) is the part of the HiFi Microphone (HiFi Mic) that
you attach to your apparel or duty belt. The mic:
l
Transmits audio through the base for the DVR to record
l
Mutes transmitted audio, as needed (see Talk/Mute slide button on page
22 )
l
Triggers the DVR to start recording, as needed (see Talk/Mute slide
button on page 22 )
l
Communicates its status using the display and the status LEDs (for
information about the icons on the display, see
Display on page 26 ; for
information on the status LEDs, see Status LEDs on page 24 )
WGD00091
Revision F
21