Watchguard DV-1 guide, User Manual

Page: 61 / 142

DETAILED DV-1 OPERATION FRONT PANEL CONTROLS
61
The DV-1 can operate up to 3 cameras:

Front Camera
– Main windshield-view zoom camera

Cabin Camera
– Backseat-view camera

Rear/Auxiliary Camera
– Optional and may have zoom
capability
The system automatically senses which cameras are installed and
provides controls in the
Camera Menu accessible from the Front
Panel .
The standard Combination camera consists of the Front and Cabin
cameras which are built into the same enclosure. It includes Camera
Keypad controls on the camera back which control only the Front
camera. The Cabin camera has a fixed, wide-angle lens, and it does
not include any manual controls.
The optional Rear/Auxiliary Camera is controlled exclusively
through the Camera Menu on the Front Panel .
Press the
CAMERA
key on the Front Panel .
The Camera Menu is displayed.
A list of available cameras is displayed on the right side of the
screen. Press the corresponding key to the right of the key label to
turn the desired camera
ON
or
OFF
.
Only two cameras can be displayed on-screen at once. The Front
c amera is always favored. For example, if the Front c amera and
Cabin c amera are both
ON
, and the Rear/Auxiliary c amera is
selected, the Cabin c amera is turned
OFF
.
LED indicators above the
CAMERA
key indicate the currently active
cameras. The LED is
green
for the Front c amera,
yellow
for the
Cabin c amera, and
red
for the Rear/Auxiliary c amera.
Press the
FRONT Camera Controls
or the
REAR Camera
Controls
key.