Graphical Digital Panel Meter WPMZ-1 INSTRUCTION MANUAL
63
IM-0882-03
Operation:[MENU]
⇒
[Diag/Log]
⇒
[OutputTest]
⇒
[AnalogOutput]
Setting:
TestOutput:
Disable (Initial state) / Enable
TeminalOutput:
0%(Initial state), 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, 100%
*The output enables as soon as TestOutput turn on.
TestOutput is enabled until it is disabled or power off.
TestOutput automatically turn off when re-power on.
BCD Output(DATA)
You can arbitrarily turn on / off each bits of BCD output (DATA) in order to check connected device.
*This function is for only products that have BCD output option.
Operation:[MENU]
⇒
[Diag/Log]
⇒
[OutputTest]
⇒
[BCD Output(DATA)]
Setting:
TestOutput:
Disable (Initial state) / Enable
POL Output
ON / OFF(Initial state)
OVER Output
ON / OFF(Initial state)
10
4
-1 / 10
4
-2 / 10
4
-4 / 10
4
-8 Output
ON / OFF(Initial state)
10
3
-1 / 10
3
-2 / 10
3
-4 / 10
3
-8 Output
ON / OFF(Initial state)
10
2
-1 / 10
2
-2 / 10
2
-4 / 10
2
-8 Output
ON / OFF(Initial state)
10
1
-1 / 10
1
-2 / 10
1
-4 / 10
1
-8 Output
ON / OFF(Initial state)
10
0
-1 / 10
0
-2 / 10
0
-4 / 10
0
-8 Output
ON / OFF(Initial state)
*The output enables as soon as TestOutput turn on.
TestOutput is enabled until it is disabled or power off.
TestOutput automatically turn off when re-power on.
BCD Output (PC)
You can arbitrarily turn on / off each bits of BCD output (PC) in order to check connected device.
*This function is for only products that have BCD output option.
Operation:[MENU]
⇒
[Diag/Log]
⇒
[OutputTest]
⇒
[BCD Output(DATA)]
Setting:
TestOutput:
Disable (Initial state) / Enable
PC Output
ON / OFF(Initial state)
*The output enables as soon as TestOutput turn on.
TestOutput is enabled until it is disabled or power off.
TestOutput automatically turn off when re-power on.
ModbusCom
Display received data and transmitted data of Modbus communication.
*This function is for only products that have RS485 output option.
Operation:[MENU]
⇒
[Diag/Log]
⇒
[OutputTest]
⇒
[ModbusCom]
Setting:
RecieveData:
(Data sent form host.)
TransmitData:
(Data replied to host)
