Doc. P/N:
WSP-009-008
Version: V1.3
Issue Date:
April 2014
40
6.7.2 Sensor Data Tab
The Sensor Data tab shows current sensor data used by WASSP. The latest 10 seconds of Roll, Pitch
and Heave information of the vessel are drawn on the scrolling graph. Vessel Heading, Speed over
Ground and the current UTC Time and Date are also represented on this display.
If vital sensor information is missing, the Status will read RED, and will show what sensor is required.
6.8
IQ Bars
This display shows the IQ and magnitude of the received signal on each channel.
Refer to section “8.1.2 Commissioning Step 2: Channel Gain” on page 39 of the
Installation Manual for further information.
Pause the
display
Vertical (Y)
Scale
Cursor
information
overlay
Roll
signal
Pitch
signal
Heave
signal
Figure 21. Raw Info - Sensor Data Tab
Figure 22. IQ Bars display
