Doc. P/N:
WSP-009-008
Version: V1.3
Issue Date:
April 2014
26
s
hOW
cOG
When this button is enabled, the
Course Over Ground
of the vessel
will be overlayed on the 2D display in yellow.
The COG is calculated from the GPS position.
m
arks
Marks are used to place a user marker at a location of interest.
The mark will have a yellow circle when it
is highlighted. Left clicking will bring up the
Mark Setup window. Configuring the mark
is optional.
Press to select
Mark Colour
Press to select
Mark Type
Enter Mark Name
Enter a number
Mark Position can
be changed
Press to Close AND Activate
changes made to the Mark
Press this to enable deleting the mark.
Press UPDATE to complete the process.
Press to Close
without saving
changes.
Figure 10. Mark Setup form
Note: If the charting displays aren’t updating
the ship’s position, make sure your GPS is ON.
