Wassp DRX Installation Manual Download Page 51

Page: 51 / 52

Page 100 of 102

Page 101 of 102

Doc: DRX Installation

Version: 7.1 January 2021

Doc: DRX Installation
Version: 7.1 January 2021

wassp.com

DRX INSTALLATION MANUAL

APPENDIX I - PRODUCT REGISTRATION, SUPPORT
AND RESOURCES

WARRANTY

DRX products are covered with a one year limited warranty. In order to be covered by
the warranty, the WASSP DRX must be registered with WASSP Ltd. The product warranty
registration form can be filled in online by going to:

http://wassp.com/product-warranty-registration/

TECHNICAL SUPPORT

If you require maintenance and/or repair contact your local dealer. A list of WASSP
dealers and distributors is available at

wassp.com.

DRX technical support is available directly through:

Online:

http://wassp.com/support/

and click on ‘Request Support’

LATEST RESOURCES

For the latest version of manuals:

http://wassp.com/support/

and click on ‘Manuals’

For software updates and release notes:

http://wassp.com/support/

and click on

‘Request Support’

For Knowledge Base:

http://support.wassp.com:8095/display/KB/

For System drawings, mechanical drawings and declarations of conformity:

http://wassp.com/support/

and click on ‘Request Support’

Summary of Contents for DRX





















































Search results

Summary of Contents for DRX

Reviews:

Brands by name

Popular brands

Wassp DRX, Installation Manual

Search results

Summary of Contents for DRX

Reviews:

Brands by name

Popular brands