10
TECHNICAL DATA
• Flow pressure: Recommended as 1.5 to
6 bar; in case of more than 6 bar con-
nection pressure, we recommend that a
pressure reducer is installed.
• Water temperature: max. 60 °C.
INSTRUCTIONS FOR CARE
Sanitary faucets require special care. The-
refore please pay attention to the follo-
wing instructions:
• Chrome-plated surfaces are sensitive to
agents used to dissolve limescale, acidic
cleaning agents and all types of abrasive
cleaners.
• Coloured surfaces must never be
cleaned with abrasive, caustic or alco-
hol-based agents.
• Clean your faucets with clear water only,
using a soft cloth or chamois.
• Please make sure that the cleaners do
not enter the cartridge housing. This can
lead to a stiff operating lever and noises.
Do not forget to unscrew the mixer jet at
regular intervals and remove any limescale
residue or foreign bodies. It is recom-
mended to replace the mixer jet with a
new one if it is very dirty.
MAINTENANCE
• Please note that a cartridge is a wear
part. If the water is very hard or dirty, you
may need to replace it every 1-2 years
(see page 27).
• Check all connections at regular intervals
for leakage or visible damage.
• In the event of leakage or visible damage
to the faucet or connection hoses, these
should be checked or replaced immedi-
ately by an expert.
• You can purchase a new cartridge from
the service centre indicated.
DECOMMISSIONING
• Cut off the water supply before disman-
tling the product.
• Pay attention to escaping residual water.
• Disassemble the product in the reverse
order of the assembly instructions.
DISPOSAL
Your kitchen faucet is delivered in a solid
packaging, in order to protect it against
transport damages. The packaging con-
sists of recyclable materials. Dispose it in
an environmentally suitable manner.
Do not throw the product into the normal
domestic waste at the end of its service
life, but ask your municipal administration
about the possibility of an environmentally
friendly disposal.
The illustrations are to be considered as
figurative representations, deviations of the
product are possible. Subject to technical
modifications.
Summary of Contents for WT11
