Wassermann Polyquick 160-T120, User Manual

Page: 4 / 28

1 Features
• Compact table-top unit for pressure polymerisation up to 120 °C in a water bath
• Large capacity Ø 150 mm, depth 285 mm
• Touch screen for fast and easy operation
• 13 programmes, each with three individually configurable polymerisation stages
• The unit can also be operated as a pressure compactor
• Rapid draining: prompt switch between the two modes
• Separate menu for each mode
• Intelligent workflow preset by the software helps the user to ensure operational safety
• Exact remaining time displayed
• Powerful, electronically controlled heating for optimal water temperature
• Pressure relief valve for protection in case of malfunction (7 bar)
• Safety lid with bayonet lock
• Dry-run protection
• Engraving in container indicating max. water level
• Time and cost saving due to thermal insulation
• Made almost entirely of stainless steel
• Low maintenance, easy to service
2 Safety Symbols used in this Manual
Warning!
This is a warning of risk situations and dangers.
Failure to observe this warning could be life-threatening. These warnings has to
be observed.
Information!
This symbol draws your attention to specific features that has to be observed.
4