Equipment location
Flat surface
Avoid direct sunlight
Avoid harsh environments (chemical agents, dust, dirt)
Tank location
Locate the chosen tank considering the dispensation point of Type II Water. It is preferable that
the tank should be opaque, with cover, and receive no direct sunlight. It is advisable to have a
safety spillway to a drainage outlet.
Electrical connection
Transformer:
Power connection : 110 - 230 VAC. Socket Type C, Europlug.
Connection to the equipment: Rear connection Plug-in type
Accessible plug in case of need to disconnect the power supply.
Plug above or beside the equipment.
Hydraulic connection
If a reservoir is not supplied together with the equipment, it is supplied a level to be placed on a reservoir selected by the
user.
It is necessary to make a holes (
∅
16 mm) to place the fittings for the level and the Type II Water tube.
The level should be placed in vertical position.
