6.5
Diagnostics
Main Menu
Diagnostics
Print Config.
Dump Mode
Battery
Print Head
6.5.1
Print Config.
Main Menu
Diagnostics
Print Config.
This feature is used to print current printer configuration to the label. On the
configuration printout, there is a print head test pattern, which is useful for checking if
there is any dot damage on the print head heater element. Please refer to
for more details.
6.5.2
Dump Mode
Main Menu
Diagnostics
Dump Mode
Captures the data from the communications port and prints out the data received by
printer. In the dump mode, all characters will be printed in 2 columns. (Please refer to
) The left side characters are received from your system and right side
data are the corresponding hexadecimal value of the characters. It allows users or
engineers to verify and debug the program.
Note:
Dump mode requires 4” wide paper width.
6.5.3
Battery
- 55 -
Summary of Contents for WPL4M Series
