manualshive.com logo in svg

Wasp WDI4600, Product Reference Manual, Page: 137 / 284

Share
Download
Wasp WDI4600 Product Reference Manual Download Page 137

Interleaved 2 of 5 CIP HR

Enter/Exit Programming Mode

Product Reference Guide

        

                   127

INTERLEAVED 2 OF 5 CIP HR

The following options apply to the Interleaved 2 of 5 CIP HR symbology.

Interleaved 2 of 5 CIP HR Enable/Disable

Enables/Disables ability of reader to decode Interleaved 2 of 5 CIP HR labels.

DEFAULT

$CCHEN00(CR)

Interleaved 2 of 5 CIP HR = Disable

$CCHEN01(CR)

Interleaved 2 of 5 CIP HR = Enable

FOLLETT 2 OF 5

The following options apply to the Follett 2 of 5 symbology.

Follett 2 of 5 Enable/Disable

Enables/Disables ability of reader to decode Plessey labels.

DEFAULT

$CF2EN00(CR)

Follett 2 of 5 = Disable

$CF2EN01(CR)

Follett 2 of 5 = Enable

Summary of Contents for WDI4600





























































































































































































































































































Reviews:

No comments