Wasp 2D, Reference Manual

Page: 59 / 200

Data Format Editor Introduction
Product Reference Guide 5-5
ED Check to make sure there is a non-numeric ASCII character at the current
cursor position. If character is numeric, format is aborted. Syntax = ED .
Data Form at Editor
Data Form atter
When Data Formatter is turned off, the bar code data is output to the
host as read (including prefixes and suffixes). Choose one of the follow-
ing options.
Default = Data Formatter On, but Not Required.
When Data Formatter is required, all input data must conform to an
edited format or the imager does not transmit the input data to the host
device.
Enter Data Format
* Default Data Format
Clear One Data Format
Save
Discard
Clear All Data Formats
Data Formatter Off
* Data Formatter On,
but Not Required
Data Format On, Format Required