Quick Reference Guide
2-1
Chapter 2
Maintenance
Repairs
Repairs and/or upgrades are not to be performed on this product. These
services are to be performed only by an authorized service center. See the
Product Reference Guide for further information.
Maintenance
The Imager provides reliable and efficient operation with a minimum of
care. Although specific maintenance is not required, the following peri-
odic checks ensure dependable Imager operation:
Cleaning the Imager’s Window
Reading performance may degrade if the Imager’s window is not clean.
If the window is visibly dirty, or if the Imager isn’t operating well, clean
the window with a soft cloth or lens tissue dampened with water (or a
mild detergent- water solution). If a detergent solution is used, rinse
with a clean lens tissue dampened with water only.
The Imager’s housing may also be cleaned the same way.
CAUTION
Do not submerge the Imager in water. Do not
use abrasive wipes or tissues on the Imager’s
window – abrasive wipes may scratch the win-
dow.
Never use solvents (e.g., acetone, benzene,
ether, or phenol-based agents) on the housing
or window – solvents may damage the finish or
the window.
