Apr 29, 2022
Series-XL QuickStart
with ENLIGHTEN
Rev. 1
15 of 17
Hardware Capture showing TEC stabilized to -55°C over 3min
4.2.
Raman Mode
Use the “Techniques” menu to change from the default “Scope” mode to “Raman.”
When you change to Raman Mode, several things happen:
1.
You are taken to the Setup Screen to confirm your measurement options
2.
The “Wavenumber” field is automatically checked for you under Saved Data Options
3.
You are prompted to take a dark measurement
Raman Setup options
When you are content that your settings are correct, click “Capture” to return to the Scope screen.
4.3.
Dark Measurement
Take a dark measurement by clicking the dark “light bulb” icon on the button bar.
4.4.
Sample Measurement
Ensure your sample is safely ensconced in a sealed vial accessory, then turn on your laser.
