18
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Motor fails to start when
switch trigger is
depressed.
Battery is not secure.
To secure the battery pack, make
sure the latches on the top of the
battery pack snap into place
.
Battery is not charged.
Charge the battery pack according to
the instructions included with your
model.
Motor runs but cutting
blades do not move.
Hedger damaged.
Do not use hedge trimmer.
Call for technical service
.
Hedge trimmer smokes
during operation.
Hedger damaged.
Do not use hedge trimmer.
Call for technical service.
Motor hums, blades not
move.
Debris or other may be
jamming the blades.
Remove battery, clear debris blockage
from blades.
The blade speed is slow
and the working efficiency
is low
Dust and tree pulp lead to
the blade friction
resistance increased
Clean blade and lubricate blade
regularly (e.g. 1 hour per operation)
LED indicator of tool flash
for 1-19 times, motor fails
to start
Motor controller fault, or
over temperature, or low
battery, or over load, etc.
1.Release the trigger and restart the
machine after 3-5s; or
2.stop the operation and cool the tool
and battery; or
3. Charge the battery
