Warrior, Inc.
11100 SW Industrial Way
Tualatin, OR 97062
Phone: (888) 220-6861
Fax: (503) 692-0364
KIT CONTENTS:
Item
Qty
Item
Qty
MOD Front Bumper
1
Bolt plate
4
Installation instructions
1
1/2” x 1-1/2” Carriage Bolt
8
Plastic wire retaining clips
5
1/2” Flange nut
8
MID-WIDTH BUMPER ADDITIONAL CONTENTS (part #’s 6568 & 6578 only):
Item
Qty
Item
Qty
Fog light mount bracket
2
#10-32 x 1/2” Button head screw
8
1/4” SAE washer
8
#10-32 Keps nut
8
1/4” Nyloc nut
8
INSTALLATION NOTES:
Before beginning installation, remove the front bumper and lower plastic valence (if
applicable). Consult the Factory Service Manual, or research online for guidance if
needed.
You will reuse your factory fog lights if installing a Mid-width version of the MOD bumper
(alternatively, you may also upgrade to OEM fit aftermarket lights). Make sure to remove
factory fog lights and the wire harness before discarding OEM bumper.
MOD BUMPER INSTALLATION:
Install your MOD Bumper before installing a winch (and the fog lights where applicable).
The mount plate of the bumper has multiple punched holes.
IT IS IMPORTANT THAT YOU
USE THE CORRECT HOLES WHEN MOUNTING THE BUMPER.
Follow the instructions below
carefully.
