WARN INDUSTRIES
PAGE 3
69473A0
III. INSTALLATION CONTINUED
Figure 4A
Figure 4B
4.
Attach the rear of the bracket to the frame using 2, 5/
16 - 18 x 2” hex head bolts, 5/16” flat washers, spacers
and 5/16” lock nut. The spacer will go in between the
plate and the frame. See figure 4A. Tighten bolts down
to 17 ft lbs. Completed Assemply shown in figure 4B
.
5.
Replace reflectors to outside of winch mounting
bracket and wire winch per installation instructions
included with winch.
THE WINCH MOUNTING PLATE INSTALLATION IS
NOW COMPLETE. PROCEED TO SECTION IV
TITLED “MAINTENANCE/CARE”.
FAILURE TO SECURELY TIGHTEN ALL BOLTS ON
THE WINCH PLATE, WINCH, AND FAIRLEAD CAN
RESULT IN PRODUCT FAILURE WHICH MAY
RESULT IN VEHICLE DAMAGE AND OPERATOR
INJURY OR DEATH. DOUBLE CHECK THAT ALL
BOLTS ARE SECURELY TIGHTENED PRIOR TO USE.
WARNING
READ THE VEHICLE’S OPERATOR MANUAL,
WINCH OPERATOR MANUAL, AND ALL WARNING
LABELS PRIOR TO OPERATION OF ATV AND
WINCH.
WARNING
IV. MAINTENANCE/CARE
1.
Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware
that appears rusted or deformed.
2.
Inspect all nuts and bolts on the winch, winch mount,, and related hardware prior to each use. Tighten all
nuts that appear to be loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3.
Check all cables prior to use. Replace cables that look worn or frayed.
4.
Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
WARNING
PERFORM REGULAR INSPECTIONS ON THE WINCH, WINCH MOUNT, AND RELATED HARDWARE.
NEVER OPERATE THE WINCH WITH DAMAGED OR MISSING PARTS. FAILURE TO FOLLOW THIS
WARNING MAY CAUSE VEHICLE DAMAGE AND OPERATOR INJURY OR DEATH.
