background image

16 March 2023

 

Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification.

 

1

 

Gas Type Conversion NG/LPG

 

NG to LPG

 

 

1.

 

Jets needs to be replaced.

 

2.

 

Jumper needs to be removed from the control box.

 

3.

 

Pressures needs to be adjusted.

 

4.

 

Pilot needs to replaced, make sure air

-

intake is opened.

 

 

 

LPG to NG

 

 

1.

 

Jets needs to be drilled out

 

2.

 

Jumper needs to be added to the control box.

 

3.

 

Pressures needs to be adjusted.

 

4.

 

Pilot needs to replaced, make sure air

-

intake is closed.

 

 

 

 

 

 

 

 

 

 

NG to LPG

 

 

1.

 

Jets needs to be replaced.

 

2.

 

Remove NG regulator

 

3.

 

Pressures needs to be adjusted.

 

4.

 

Pilot needs to be adjusted and air

-

intake on it opened.

 

 

 

LPG to NG

 

 

1.

 

Jets needs to be drilled out

 

2.

 

NG regulator to be added

 

3.

 

Pressures needs to be adjusted.

 

4.

 

Pilot needs to be adjusted and air

-

intake closed

 

1.1 TYPES OF CONVERSIONS

 

1.1.1 EG SERIES ELECTRONIC 

 

1.1.2 SG SERIES MANUAL

 

Summary of Contents for SG-EG 600








Reviews: