4
warmhaus.com
1. INTRODUCTION
Warmhaus was established in 1996 and is an affiliate
of Beycelik Holding which produces panel radiators,
high capacity wall hung condensing boilers and steel
panel radiators. Beycelik Holding has also branches in
automotive, energy, tourism and insurance and currently
provides employment opportunities for almost 5.000
people.
We thank you for chosing the Warmhaus boiler to
maintain your heating and domestic hot water comfort
for long years. Warmhaus products are manufactured
in accordance with EU standards and exported to many
countries.
1.1. GENERAL WARNINGS
This book should be carefully protected and referred to
when necessary, as it contains important information
regarding installation and operation of the product.
Please read these instructions fully before operating the
appliance:
Radiator and DHW (Domestic Hot Water )
installations should be performed by a
competent and certified engineering company
in accordance with legal regulations in force.
This appliance must only be installed by a
competent Gas Safe registered engineer and if
in Ireland an RGI (Registered Gas Installer) and
failure to adhere to this could lead to
prosecution.
Natural Gas Installation Project; One of the
dealers authorised by a gas company located
at your city should be preferred for performing
project and etude studies.
In order to enable use of the boiler with LPG
bottles or LPG tanks, conversation of the boiler
should be performed by our authorised
Warmhaus service. Project design and
application for LPG use should be performed by the
company supplying the tank in accordance with local and
legal rules.
1.2. GENERAL WARRANTY
CONDITIONS
Manufacturer company cannot be held
responsible for injury of people, other
living things (animals, plants) or damage
to properties due to installation by
unauthorised people.
Only the authorised Warmhaus Service is
authorised to make the electrical connection of
boiler and supplying electricity to the boiler.
The maintenance and repairs as the result of failure of
the product within the warranty period due to material,
production and installation errors shall be performed as
free of charge without claiming any workmanship costs
and spare part payments.
The intended use for this appliance is to heat
water and supply DHW in domestic premises.
Always refer to the appliance data badge for correct
specifications and ensure the boiler is operating within
the safety settings outlined by Warmhaus.
Do not modify our flue system, and always use only the
Warmhaus approved flue with this appliance.
Ensure Warmhaus original flue components including
seals and gaskets are used for the installation of this
appliance.
The installation of the appliance and controls must be
done in accordance to the current Gas Safety (Installation
and Use) Regulations
Any intervention on a sealed component is
forbidden.
Maintenance and repairment of the appliance
must only be carried out by a competent Gas
Safe registered engineer and if in Ireland an
RGI (Registered Gas Installer)
Children must not operate the boiler.
