INSTALLATION (Continued)
Getting the Most from the LiftMate Battery
NOTE: The LiftMate has protective circuitry to
prevent the
charge from draining to excessively low levels.
Keeping the battery charged will ensure optimal
service, while extending battery life to its fullest.
1. When the charge in the LiftMate battery drops to
a pre-set level the “Low Battery” indicator light on
the hand pendant will flash and the unit will beep
when the any button is pushed. Plug LiftMate into a
wall receptacle as soon as possible to recharge the
battery.
2. When the charge in the LiftMate battery drops to
a level that will cause battery life to shorten if use
continues, all functions will stop. The unit will beep,
and a steady indicator light on the hand pendant will
appear if any hand pendant button is pushed. Plug
LiftMate into wall receptacle to enable functions
and recharge battery.
3. Always use a replacement battery from Brewer.
Never use any other battery which could cause
damage to the unit or improper operation.
4. When not using the LiftMate, always keep the
unit plugged into a wall receptacle to keep the
battery charged. Leaving the unit unplugged for an
extended period of time (i.e. several months) will
allow the battery to discharge, causing premature
battery failure.
LiftMate Battery Disposal
CAUTION
●Do not disassemble the LiftMate battery.
●Please dispose of the LiftMate battery according to
your local regulations for lead-acid storage batteries
Summary of Contents for Brewer Patient LiftMate
Page 2: ...COMPONENT IDENTIFICATION ...
