Learning a hand-held transmitter into the product
2009209 [Rev. 4 - en]/2015-12-08
Page 7 | 14
3
Learning a hand-held transmitter
into the product
WMS Hand-held transmitter basic (art. no. 1002953)
INFO
Only product types of the same type can be operated with a WMS Hand-held transmitter basic.
For learning, voltage should only be applied to one receiver.
W
aking up t
he
hand-held tr
ansmitt
er
Press the button to wake up the hand-held
transmitter.
A
5 s
Press the learn button for approx. 5 seconds.
The transmission LED flashes.
S
tar
ting
scanning
Scan procedure:
The transmission LED flash-
es green for 2 s = receiver is
known, scan continues
Transmission LED flashes
red = new recipient detected,
scan is stopped, learn in the re-
ceiver
Transmission LED flashes or-
ange = no receiver found, scan
is finished
Identifying t
he
pr
oduct
Press the control button briefly.
The product waves.
Se
t t
he
pr
oduct t
ype
Press the arrow button briefly.
A
1x flash = awning
2x flashes = roller shutter
Automatic LED
A
flashes.
Sa
ving t
he
pr
oduct t
ype
Press the STOP button briefly.
Transmission LED lights up green for 2 s. The
assignment is stored.
Learning in t
he hand-held tr
ansmitt
er
Ending t
he
scan
Press the learn button briefly.
The hand-held transmitter is learned in.
