890557_d•en•01.07.2014
We reserve the right to carry out improvements
84
Wisotronic 1-channel
Operating instructions
7.4 Leave time
Enter the beginning and end of your leave in this menu. The automatic con-
trols set at the comfort functions for the leave are then active during this
time. The products drive to a specific position (and possible slat angle) at the
beginning of your leave if you have activated this settings in the comfort func-
tions of the respected channels.
In the main menu, press the [
Sett.
] function button. Now go to the [
Leave
]
menu.
The following view appears in the display:
7.4.1 Leave begin dd.mm
In this menu line, you set the day and month of the beginning of your leave.
The setting range reaches from 01.01. to 31.12.
Turn the touch wheel to set the day of the “Leave begin hh:mm” value. A
push on the touch wheel causes the display to jump to the month. Set the
month in the same manner.
Accept the value by pressing the touch wheel.
The function button [
Delete
] removes the setting [
--.--
].
NOTE
The leave time is only taken into account by the Wisotronic when you have
entered a date for the beginning and the end of the leave.
7.4.2 Leave end dd.mm
In this menu line, you set the day and month of the end of your leave. The
setting range reaches from 01.01. to 31.12.
Turn the touch wheel to set the day of the “Leave end hh:mm” value. A push
on the touch wheel causes the display to jump to the month. Set the month
in the same manner.
Accept the value by pressing the touch wheel.
The function button [
Delete
] removes the setting [
--.--
].
Start menu
Main menu
Settings
Leave time
Leave time
