WAREMA Wisotronic Operating Instructions Manual Download

Page: 67 / 112

890557_d•en•01.07.2014

We reserve the right to carry out improvements

7.2.6.1 Uime switch OA/OFF

In this menu line, you can activate or deactivate the timer switch for the se-

lected channel.

Set or delete the checkmark in the line [

Time switch ON/OFF

] to activate or

deactivate the time switch.
The function button [

Stand.

] sets the product-specific factory setting.

Selecting this menu line leads you to the respective submenu where you can

set the switching times for the respective day or together for the selected

days. An example is provided here showing the settings for Monday; the sub-

menus of the other days are identical.

Select the menu line [

Monday

] with the touch wheel and press the

touch wheel.

The following view appears in the display (the header may show the channel

name you selected instead of

Channel 1

and the setting values may be dif-

ferent):

Monday

Uuesday

Wednesday

Uhursday

Friday

Saturday

Sunday

Monday - Friday

Saturday - Sunday

Monday - Sunday

Uime switch

Summary of Contents for Wisotronic

















































































































Search results

Summary of Contents for Wisotronic

Reviews:

Related manuals for Wisotronic

Brands by name

Popular brands

WAREMA Wisotronic, Operating Instructions Manual

Search results

Summary of Contents for Wisotronic

Reviews:

Related manuals for Wisotronic

Brands by name

Popular brands