890557_d•en•01.07.2014
We reserve the right to carry out improvements
50
Wisotronic 1-channel
Operating instructions
7.2.3.1 Basic functions
The temperature control permits the comfortable control of your sun shading
depending on the inside and outside temperature.
The temperature control can be completely activated or deactivated per
channel.
The Wisotronic controls your unit by constantly comparing the temperature
limit values you have set with the local prevailing temperatures. Move com-
mands are triggered when measured values exceed or fall below limit values.
Requirement: The necessary sensors must have been connected and as-
signed correctly.
Five operating modes are available for the temperature control:
The operating mode "Move directly" only triggers move commands when a
limit value is exceeded or fallen below.
The "Enable/disable sun" operating mode is also called "Temperature-
controlled sun control" and can be used to enable/disable the sun control (it
must have first been activated by setting the checkmark in the [
Sun control
]
menu).
The "Enable/disable differential temperature" operating mode controls win-
dow drives depending on the inside and outside temperature (cooling func-
tion) by activating the differential temperature control.
The operating mode "Direct control with steps" triggers move commands
when a limit value is exceeded or fallen below. According to adjustable step
times, additional move commands are triggered if limit values
continue to be exceeded or fallen below.
The operating mode "Difference temperature with steps" can control window
drives depending on the inside and outside temperature. According to adjust-
able step durations, additional move commands are triggered if limit values
continue to be exceeded.
Limit values must be specified to allow the Wisotronic to fulfil all these con-
trol tasks. The temperature control can thereby be optimally adjusted to your
preferences.
Uemperature control
