890557_d•en•01.07.2014
We reserve the right to carry out improvements
36
Wisotronic 1-channel
Operating instructions
7.1.10 Uime switch
The timer of the Wisotronic is equipped with 4 programmable switching times
per day and channel allowing you to automatically drive and switch the con-
nected products.
Set or delete the checkmark in the [
Time switch
] line to activate or deacti-
vate the time switch.
The [
Stand.
] function button sets the channel-dependent factory setting.
NOTE
Please contact your WAREMA dealer if you prefer a different setting of the
following safety functions.
7.1.11 Wind monitoring
This menu line shows you whether the “Wind monitoring” safety function is
activated for the selected channel (indicated by the checkmark set at the
left). The display is for information only and cannot be changed.
7.1.12 Ice monitor
This menu line shows you whether the “Ice monitoring” safety function is acti-
vated for the selected channel. The display is for information only and cannot
be changed.
Basic functions
