warema_890558_alhb_en_v5•2022-02-01
We reserve the right to carry out improvements
14
Wisotronic 1-channel
Installation instructions
3.3 Concept
Before you install and start the Wisotronic, this chapter will explain the basic
concept of the system and familiarise you with the many options and the
complex projects it can be used to realise.
Product 1 (external venetian
blind 1 south)
Channel 1 (external venetian
blind 1 south)
Group 1 (channels 1+2)
Scene 1
Product 2 (external venetian
blind 2 east)
Product 3 (roller shutter 3 west)
.
.
.
Channel 2 (external venetian
blind 2 east)
Channel 3 (roller shutter 3 west)
.
.
.
Group 2 (channel 3)
.
.
.
Scene 2
Scene 3
Scene 4
Product 4
Channel 4
Group 4
Products are considered to be
all connected power consum-
ers (e.g.: sun shading product,
window).
Products can be allocated to
channels (e.g.: channel 3, roller
shutter west).
Any number of channels can
be organised into groups (e.g.:
group 1, all external venetian
blinds).
Any number of channels can be
organised into scenes; these
channels move to a position that
is previously learned in for a set
dwell time.
Product settings
Contact allocation
Run times
Slat angle
Local pushbutton operating
mode
Channel settings:
Product type
Safety functions (wind, ice)
Comfort functions ↵(precipita-
tion, time, photo, dawn/dusk,
temperature)
A maximum of 4 groups can be
created.
There are no groups in the
Wisotronic 1-channel.
A maximum of 4 scenes can be
created.
Fig. 3
Properties of products, channels, groups and scenes
Introduction
