INSTALLATION GUIDE
HIGH LEVEL SHELF WITH HANGING RAIL
& CENTRE SUPPORT PANEL
PACK
F
This pack contains:
• Shelf
(l)1600/2000/2400mm x (w)450mm x (d)18 mm
• 2 x side shelf bearers
(l)430mm x (w)87mm x (d)18mm
• 1 x back shelf bearer
(l)1600 (2x790mm)/2000 (2x990mm)/2400mm
x (2x1190mm) x (w)87mm x (d)18mm
• Hanging rail
(l)1600/2000/2400mm
• Centre support panel
(l)1750mm x (w)450mm
• Fixings - 5 x corner blocks; 16 x wallplugs; 16 x 40mm
screws; 8 x 30mm screws; 4 x hanging rail brackets;
16 x 16mm screws; 4 x 10mm screws; self-adhesive
screw head cover caps
• Drilling template
This information sheet provides details of how to install an internal high level shelf with hanging rail and centre
support panel. Please take time to read it through fully prior to the installation of your sliding wardrobe doors.
1
3
3
2
4
1 - Shelf
2 - Back shelf bearers (x2)
3 - Side shelf bearers
4 - Hanging rails (x2)
5 - Centre support/dividing panel
5
1
Tools required (not supplied)
• Electric drill, 2mm diam. wood drill bit and
6mm diam. masonry drill bit
• Crosshead screwdriver
• Handsaw (with appropriate blade for
cutting MFC)
• Hacksaw (32tpi blade recommended)
• Spirit level
• Bradawl
• Tape measure
• Pencil
