Unattended Harvester Head
When leaving the harvester head unattended, it is
advisable to leave it in the upright position (tilt-up),
pointing away from the operator’s cab, with the boom
stretched right out.
Do not lay the harvester head and link mechanism down
in such a manner that the rotator comes into contact
with the arm. Doing so may result in serious damage to
the rotator motor.
AM24480,0000075-19-24AUG14
Delimbing Multi-leaders
When handling multi-leaders, delimb up to the leader,
and, if possible, open the delimb arms and feed through.
This will allow the arms to be closed on one of the
leaders after passing the fork. This method requires
feeding several metres before being closed, at which
point the harvester head can be reversed to the point
where one leader can be cut off.
This leader can now be processed.
If the harvester head will not pass over the fork, drop the
log and re-position the head further down the log.
CAUTION: When cutting leaders, ensure the
saw bar is not pinched between leaders.
T7M7G6M,00004B5-19-10OCT21
Operation: Miscellaneous
2-7-1
Summary of Contents for HTH622B SIII
Page 65: ...Notes...
Page 66: ...Notes...
