Support Email/ Skype: [email protected]
14
3. iPhone/iPad Access
Wansview APP (iPhone version) is an application developed by our company based on the iOS system. It is applicable to iPad/iPod
of iPhone4s or higher. It supports iOS 6.0 or 9.2. The functional characteristics of this software:
Supports Alarm Notification
Temperature and Humidity Alarm
Supports rapid mobile phone acoustic configuration of camera Wi-Fi;
Supports PnP products of the Smart P2P cloud;
Supports viewing on multiple screens (Supports simultaneous viewing of up to 4 cameras);
Supports Playback SD Card Recording at mobile phone terminal;
Supports video control, video parameter setting, audio monitoring, intercom, pan/tilt control, snapshot and other
functions;
Supports searching for and adding LAN equipment;
Supports editing and management of the equipment (Wi-Fi/Email/Alarm/FTP and other advanced functions);
Supports photo sharing
3.1 Software Installation
3.2 App Interface Introduction
3.2.1 Interface
Camera
“Wansview” can be searched for and downloaded from the
App Store.
Or scan QR code to download and install App “Wansview” to
your mobile phone.
After installation, the icon will appear on your phone
By tapping icon
, user can add
camera, check camera list and tap > ,
user can enter to Edit Camera page.
