W&T Microwall Gigabit 55210, Manual

Page: 61 / 75

61
W&T
Security & Maintenance
Subject to error and alteration
6�5 Emergencies access to the Microwall
In case of a forgotten password or if web-based management
has been deactivated for security reasons, emergency access
can be activated via the recessed mounted service button on
the front panel.
Service button
Start emergency access
Press the button with a suitable pointed object (e.g. paper
clip) and keep it pressed until the error LED flashes slowly
after approx. 3.5s. If you release the button now, the emer-
gency access is activated.
The router/firewall function is completely retained in this
state.
i The emergency access activates a non-password-protected
web page on the Microwall with the possibility to overwrite
the current password. You should therefore take appropriate
measures against unauthorized access in advance.
Calling and function of the emergency access
Emergency access is provided by browser with HTTPS via TCP
port 446:
https://[IP address|hostname]:446
Without a password request you can access the website with the following op-
tions:
Overwriting the current password
By activating the Change password option, you have the pos-
sibility to change the current password for access to the web
management.
We recommend passwords with a minimum length of 15 cha-