W&T Microwall Gigabit 55210, Manual

Page: 17 / 75

17
W&T
Hardware, interfaces and displays
Subject to error and alteration
Galvanic isolation
There is an electrical isolation of at least 500Vrms from the
supply voltage
Auto-Negotiation
The transmission speed and duplex method are automatical-
ly negotiated with the connected device. To avoid problems
such as duplex mismatch, we recommend that the connected
devices are also operated in auto-negotiation mode.
2�3�2 Link state
The link status is indicated by LEDs integrated in the RJ45
sockets.
Pin
1
2
3
4
5
6
7
8
Richtung
Out
Out
In
In
IN
In
In
In
Funktion
Tx+
Tx-
Rx+
Vcc positive
Vcc positive
Rx-
Vcc negative
Vcc negative
8 7 6 5 4 3 2 1
Speed/
Activity FD/HD
Speed/Activity (green/orange)
Green = 1000MBit/s Link
Green flashing = 1000MBit/s Link und Datenverkehr
Orange = 100MBit/s Link
Orange blinken = 100MBit/s Link and data traffic
FD/HD (yellow)
ON = Full duplex
OFF = Half duplex