W&T Com-Server++, Manual

Page: 97 / 228

97
W&T
Mode TCP client
Subject to error and alteration
12�1�1 TCP client mode with fixed destination system
SETUP Port x
TCP/IP Mode
...
TCP Client
...
Server Port
Server IP/URL
n
Server Port
Port number that the application (TCP server process)
addresses on the computer.
Format: decimal
n
Server IP/URL
IP address or URL of the computer on which your applicati-
on (TCP server process) is active.
Format: Dot notation or URL
1 A URL can only be assigned in conjunction with a
valid DNS server. The name used is not allowed to
contain space characters (0x20), nor can the first cha-
racter be a decimal (0x2E). A server IP or URL is deleted
by entering 0.0.0.0. For additional information refer to
the section
Menu: Setup SYSTEM
r
Setup TCP/IP
r
DNS-
Server .
Opening the TCP connection
After saving the connection data the Com-Server waits to re-
ceive any serial character. This is the trigger for opening the
connection and is sent to the TCP server together with the
following data.
Alternately the connection can also be triggered via hardware
depending on the status of a handshake input on the serial
port (CTS or DSR). Details can be found in section
Handshake
modes
r
Special
r
Pin: CTS and Pin: DSR .