background image

8

W&T

 

1�1 Legal notices

Warning concept

This manual contains notices that must be observed for your 
personal safety as well as to prevent damage to equipment. 
The notices are emphasized using a warning sign. Depending 
on the hazard level the warning notices are shown in 
decreasing severity as follows.

1

DANGER

Indicates a hazard which results in death or severe injury if no 
appropriate preventive actions are taken.

1

WARNING

Indicates a hazard which results in death or severe injury if no 
appropriate preventive actions are taken.

1

CAUTION

Indicates a hazard that can result in slight injury if no 
appropriate preventive actions are taken.

1

NOTE

Indicates a hazard which can result in equipment damage if 
no appropriate preventive actions are taken.

If more than one hazard level pertains, the highest level 
of warning is always used. If the warning sign is used in a 
warning notice to warn of personal injury, the same warning 
notice may have an additional warning of equipment damage 
appended.

Qualified personnel

The product described in this manual may be installed and 
placed in operation only by personnel who are qualified for 
the respective task.

Summary of Contents for 55211



















































































































Reviews: