Maintenance
100
Cleaning the filters in the wash cabinet
The filters in the floor of the wash chamber prevent coarse soiling
from coming into contact with the circulation system. Filters can be-
come blocked by soiling. They therefore need to be checked every
day and cleaned as necessary.
Risk of damage due to blocked waterways.
If the filters are not inserted, dirt particles will end up in the ma-
chine water circuit. The dirt particles may block the nozzles and
valves.
Only start a programme if the filters are inserted.
Check that the filters are positioned correctly when you reinsert
them after cleaning.
In the controls, it is possible to set a cleaning interval for the filters in
the wash cabinet, see “Settings
/Filter maintenance”.
The cleaning interval is not a substitute for the daily routine check of
the filters in the wash cabinet!
Danger of injury from glass shards, needles, etc. retained in the
filters.
Turn the microfine filter in the direction of the arrow and remove it
together with the coarse filter.