40
10. Servicing
Regular checks
Regular servicing of function and safety including the accessories is necessary and should be carried out at least once
every three years, unless shorter intervals are prescribed by law. The inspection must be undertaken by a qualified
organization and must include the following procedures:
Handpiece drive
> External visual inspection
> Function test
Foot control
> External visual inspection
> Function test with check to see if the maximum speed can be reached
The regular checking must only be performed by an authorized W&H service partner.
Summary of Contents for proxeo TWIST PL-40 H
Page 1: ...Instructions for use PL 40 H...
Page 49: ......
