52
MN-111 | Instructions for use | MN-111 W&H Med ENG Rev11 | 2019/01/25 | © 2019 W&H Sterilization Srl
Sterilization cycles
SET THE DRYING TIME
Dry time is set by default for each sterilization program. You can
change it and save it for the next sterilization cycle.
1
On the homepage tap the cycle and
.
2
Tap Dry time.
3
Enter the value and tap
to
confirm. This becomes the default
dry time for the current sterilization
program.
VIEW THE CYCLE PARAMETERS
You can check the real time cycle parameters or the cycle
parameters at the end of the cycle. Following is an example:
1
While the sterilization cycle is
running or when cycle ends tap
:
the cycle information page opens.
2
Tap
or
to scroll the pages.
Summary of Contents for MN-111
Page 1: ...MN 111 110 V 220 V Instructions for use MN 111 W H Med ENG Rev11 ...
Page 2: ......
Page 103: ......
