Technical data
102
Lyla | Instructions for Use | RIN-210 ENG Rev02 | 15/09/2022 | © W&H Sterilization Srl
Sterilization cycle phases
COMMON LEGEND OF THE STERILIZATION CYCLE PHASES
Following is the description of the sterilization phases.
Code
Description
PHE
Pre-heating of the sterilizer. This phase is not considered a part of the cycle.
HEA
Heating phase (heat the chamber and the load)
PV1 - PV2
Vacuum pulse (removal of air from the sterilizer chamber/load)
PP1 - PP2
Pressure pulse (steam generation)
PPH
Rise to the Plateau/Sterilization phase
PR
Process (Plateau/Sterilization phase)
DRY
Vacuum drying
LEV
Leveling. Pressure inside the sterilization chamber is leveled to the atmospheric pressure.
END
End of the cycle