LISA | Instructions for Use | VA131 2019 ENG Rev06 | 16/04/2020 | © 2020 W&H Sterilization Srl
33
Getting started
User authentication
FUNCTION AVAILABILITY
PIN MANAGEMENT
PIN “0000” is assigned as default to each new user. It has to be
changed at the first login. When the PIN is reset the default value
“0000” is reassigned.
CHANGE YOUR PIN
Change your PIN the first time you use the sterilizer and if your PIN
has been reset. This will prevent other users to use your account.
1
On the homepage tap
>
>
2
Tap your user name.
3
Enter your current PIN and tap
to confirm.
4
Tap
.
5
Enter your new PIN and tap
to
confirm: a confirmation message
with your new PIN appears.
6
Tap
and then
to go back to
the previous page.
WHAT TO DO IF YOU FORGET YOUR PIN
If...
Then...
you are a common user
contact the administrator
you are the administrator
contact your authorized service provider
Set the Elisense system
THE ELISENSE SYSTEM
The Elisense system permits the touch screen LEDs to turn on in
different colours and mode to signal the cycle status, the load
temperature and the presence of a new message/pop-up on the
sterilizer screen.
Summary of Contents for Lisa VA131-17
Page 1: ...VA131 17 VA131 22 Instructions for Use VA131 2019 ENG Rev06 ...
Page 2: ......
Page 139: ......
