Lara | Instructions for Use | RIL-1 W&H Med ENG Rev06 | 14/04/2022 | © W&H Sterilization Srl
53
Sterilization cycles
SET THE DRYING TIME
The drying time of the AUTO DRY and ECO DRY plus modes is
automatically adjusted to the total amount of load and cannot be
modified (see "Available automatic drying modes" on page 51). To
set a new drying time for the program, you should disabled the AUTO
DRY and ECO DRY plus modes first.
1
On the homepage, tap the cycle and
.
2
Select
Fixed
to disable the automatic drying mode.
3
Tap the wording
Fixed
to modify the fixed mode minutes.
4
Tap
or
to increase the minutes or decrease them.
Note
: for the minimum value of the drying time for each cycle see
"Sterilization cycles" on page 97.
5
Tap
to confirm and go back to the previous page. This
becomes the new fixed value.
CHANGE THE DRYING MODE
The AUTO DRY mode is the default one. To activate the ECO DRY plus
mode see "ECO DRY plus mode activation" on page 51.
VIEW THE CYCLE PARAMETERS
You can check the real time cycle parameters or the cycle
parameters at the end of the cycle. Following is an example:
1
While the sterilization cycle is running or when cycle ends tap
: the cycle information page opens.
2
Tap
or
to scroll the pages.
STERILIZATION CYCLE PAGE
Following are the information displayed while a cycle is running:
Part
Description
A
Sterilization cycle name
B
Drying mode enabled
C
Countdown clock (time until
the cycle completion)
D
: chamber pressure
: cycle counter
: chamber temperature
E
Date and time and door
securely locked symbol
F
Current cycle phase
G
Stop button
H
Button to open the cycle
information page
